HotelPlungeby HomePlunge

How to Turn an Existing Hotel Bathtub into a Cold Plunge

July 25, 2026 · 5 min read

How to Turn an Existing Hotel Bathtub into a Cold Plunge

Bathtub cold plunge

An existing bathtub cooled to cold plunge temperature by a portable chiller connected over the rim, with no change to the tub, the plumbing or the room.

A hotel does not need to rebuild a bathroom to offer a cold plunge. The bathtub already in the room holds the water. A chiller that rolls in beside it makes the water cold.

This guide covers what that involves with the HomePlunge H3, the unit behind the HotelPlunge program: the steps, the price, the time it takes and what housekeeping does afterwards.

The short answer

Roll a HomePlunge H3 chiller beside the tub, place its two insulated hoses over the rim and plug it into a standard 110V outlet. Setup takes about five minutes. There is no plumber, no contractor, no permit and no room out of service. The H3 takes tap water to 50°F in about 30 minutes and cools down to 34°F. The tub drains after each guest, so every stay starts with fresh water. The list price is $2,999 per unit.

Quick facts

  • Setup: About five minutes, by housekeeping or engineering
  • Building work: None. No plumbing change, no contractor, no permit
  • Power: A standard 110V outlet. The H3 draws 9A
  • Coldest set point: 34°F
  • Tap water to 50°F: About 30 minutes
  • Water: Drained after each guest. Fresh water every stay
  • List price: $2,999 per unit, bought once

What the conversion actually is

Nothing about the tub changes. The H3 sits on the floor beside it, on casters, in about 2 by 2 feet of space. Two insulated hoses go over the rim and into the water, and the unit cools the water that is already in the tub. When the unit rolls away, the bathroom is exactly as it was.

That is the difference from a built-in plunge, which is a construction project, and from a standalone plunge tub, which needs floor space of its own. Here the tub is already in the room, already filled and drained by its own tap and drain, and already cleaned by your team every day.

It works with a guest suite's bathtub or a spa tub. Rooms where the tub is separate from the shower work best, so the shower stays free.

The steps, start to finish

  1. Roll the unit to the room. It arrives fully assembled and weighs about 112 lb on casters, so one person moves it. No tools and no work order.
  2. Place the two insulated hoses over the rim of the tub. Nothing is fixed to the tub or the wall.
  3. Plug it into a standard 110V outlet. The H3 draws 9A. No electrician, no dedicated circuit and no engineering ticket.
  4. Fill the tub with cold tap water.
  5. Set the temperature and the time. Scheduling and temperature run from a phone app, so the spa or front desk can have a session ready before the guest returns.
  6. Drain the tub at checkout. Then roll the unit to the next room that booked it.

How long it takes

StageTime
Setup in the roomAbout five minutes
Tap water to 50°FAbout 30 minutes
Tap water to 34°FAbout 1 hour 20 minutes
Rooms out of serviceNone

Those times are what make same-day turns possible. Housekeeping drains the tub after checkout on the normal pass, and the water can be cold before the next guest reaches the room.

The H3 runs at 65 to 75 dB while it is actively cooling, about the level of conversation. Schedule it to cool before the guest returns.

What it costs

The HomePlunge H3 lists at $2,999 per unit and is bought once. There is no installation charge because nothing is installed: no plumber, no electrician, no contractor and no permit. The filter is reusable and rinses every 4 to 6 weeks, so there are no consumables to stock and no chemicals program to run.

Commercial pricing, the warranty for revenue-generating use and support terms are agreed in writing before any unit enters a room.

One unit is not tied to one room. It rolls, so a small fleet serves every tub room in the property, sized to how many guests book on a given night. The return calculator sizes that fleet from your room count, and the cost guide sets out each budget line.

Water and housekeeping

Each guest sits in their own water. The tub drains after each guest like any bathtub on the floor, and the next stay starts with a fresh fill. The reusable filter keeps a single guest's water clear across sessions during their stay.

For housekeeping the task is the one the team already does: drain the tub and clean it.

Where it is running

The HomePlunge chiller at a tiled bathtub at The Santaluz Club
The Santaluz Club, San Diego. Two hoses over the rim of an existing tub.

Carillon Miami Wellness Resort runs it in its spa's contrast circuit, beside the infrared sauna. The chiller connects over the edge of a stone spa tub. No plumbing work was done.

The Santaluz Club in San Diego runs it on an existing tub the same way: two hoses over the rim, a standard outlet, nothing built. Operators in South Florida can ask for a walkthrough at Carillon.

Start with one suite

Every hotel engagement starts the same way: one unit, one suite, 60 days. Choose the most wellness-positioned room you have. Measure guest comments, rate premium and booking notes, and add rooms only if the numbers say so.

If the pilot does not earn its keep, the unit rolls back out. There is nothing to un-build.

Frequently asked questions

Does the bathtub have to be modified?

No. Two insulated hoses rest over the rim and the unit stands on the floor beside the tub. Nothing is fixed to the tub, the wall or the plumbing.

Do we need a plumber or an electrician?

No. The unit arrives fully assembled and plugs into a standard 110V outlet. It draws 9A and does not need a dedicated circuit. Setup takes about five minutes with no contractor and no permit.

Do guests share the water?

No. The tub drains after each guest, so every stay starts with fresh water. The reusable filter keeps one guest's water clear during their own stay.

How cold does a hotel bathtub get?

The HomePlunge H3 cools the tub down to 34°F. It takes tap water to 50°F in about 30 minutes and to 34°F in about 1 hour 20 minutes.

Which rooms work best?

Suites and rooms where the bathtub is separate from the shower, so the shower stays free while the tub is cold. The unit is for indoor use and never needs winterizing.

See if it fits your property

Enter your rooms with a bathtub in the return calculator, or book a 15-minute call at HotelPlunge to talk through suite selection, the pilot and pricing. You can also email info@thehomeplunge.com.

See if it fits your property.

Fifteen minutes on suite selection, pilot structure and pricing, with a Carillon walkthrough if you are local.

Book a 15-minute call